Do you need help? Please contact our support team from 9 to 17 CET via support.pressclub@bmwgroup.com.

PressClub United Kingdom · Article.

On the market from 2023: BMW and MINI models with vegan interiors.

+++ Sustainability in vehicle production through innovative bio-based materials to replace raw materials of animal origin +++ Replacing leather reduces CO2e emissions by 85 percent +++

Technology
·
Corporate
·
Sustainability
·
Production, Recycling
 

Press Contact.

Georgina Cox
BMW Group

Tel: +44 (0) 7815 370 878

send an e-mail

Author.

Georgina Cox
BMW Group

This article in other PressClubs

Note: This press release is a 1:1 copy of the original issued by BMW headquarters in Germany. No adaptations have been made to cater for the UK market.

Munich. The BMW Group plans to launch its first vehicles featuring completely vegan interiors in 2023. This is being made possible primarily through the development of innovative materials with leather-like properties. It will also be possible to use these materials for steering wheel surfaces, which must fulfil demanding criteria when it comes to feel, premium appearance and wear resistance. Fully vegan interiors will be available for both BMW and MINI models for the first time from 2023. The BMW Group is thus serving the demand for vegan and leather-free interiors, which is set to increase further in the near future, especially in the US, China and Europe.

The reduction of CO2 emissions over the entire life cycle of a vehicle is the central goal of the BMW Group on the road to climate neutrality, which is to be achieved by 2050 at the latest. Material selection has a key role to play in achieving this goal. Replacing raw materials of animal origin makes a significant contribution to increasing sustainability in vehicle production. The introduction of a new surface material for steering wheels will see the proportion of vehicle components that contain traces of raw materials of animal origin fall to less than one percent in the respective BMW and MINI vehicles. As a result, these materials will now only be found in areas that are not visible to the customer, for example in various waxy substances such as gelatine used in protective coatings, lanolin in paints, tallow as an additive in elastomers and beeswax as a flux for paints.

The BMW Group has for a long time been offering various fabric alternatives to leather. Now, for the first time, it is possible to offer a suitable substitute for leather for the most important interface between driver and vehicle. The steering wheel surfaces must fulfil demanding criteria when it comes to appearance, wear resistance and durability. “With a steering wheel made from a high-quality vegan surface material, we are fulfilling the wishes of our customers who do not want to make any compromises in terms of look, feel and functionality. The innovative material withstands wear and tear caused by abrasion, perspiration and moisture and has all the desirable properties of leather,” says Uwe Köhler, Head of Development Body, Exterior Trim, Interior at the BMW Group. The only distinguishing feature of the new material will be a new grain effect on the steering wheel rim.

Leather-free surfaces reduce CO2e emissions by 85 percent.
The fact that there is now a high-quality vegan surface material with equivalent properties to the real leather previously used in the production of steering wheels represents another major step towards CO2 reduction. The new steering wheel surface material reduces CO2e emissions along the value chain by around 85 percent compared to leather. Up to now, most of the emissions produced, around 80 percent, were in the form of methane gas from cattle rearing. The remaining 20 percent was accounted for by processing of the cowhide, which is highly energy- and water-intensive.

Climate neutrality and a circular economy are the top priorities.
To achieve the goal of climate neutrality, the BMW Group is relying on the use of green electricity in production and in the supply chain, a consistently increased proportion of secondary materials and natural raw materials, highly efficient electric motors and combustion engines and a high recycling rate in line with the principles of a circular economy.

It’s all in the detail: The floor mats for various models are made from mono-material, thus avoiding material mixes that are difficult to recycle. As a result, the BMW Group saves around 23,000 tonnes of CO2 and an additional 1,600 tonnes of waste every year, since the recycled floor mats and waste material are also reused within the production process.

Research and development in the field of secondary raw materials and sustainable materials are a top priority. Future vehicle generations will offer other attractive alternatives to leather. The BMW Group is working with start-up companies to develop innovative bio-based materials. Compared to the synthetic leathers previously used, these result in around 45 percent lower CO2 emissions. MirumTM, which is 100 percent bio-based and petroleum-free, has the potential to mimic all the properties of traditional leather. Another new material, DeserttexTM, is made from pulverised cactus fibres with a bio-based polyurethane matrix. With these materials, replacing raw materials of animal origin can be combined with a significant reduction in CO2.

Article Offline Attachments.

Article Media Material.

My.PressClub Login

PressClub Information

RSS NEWS FEED.

Open Website

With the PressClub RSS service, you can also receive publications as a news feed. Choose from various topic-specific feeds as needed, or use the feed with the latest articles to stay up to date.

CO2 emission information.

The values for fuel consumption, CO2 emissions and energy consumption shown were determined in a standardised test cycle according to the European Regulation (EC) 715/2007 in the version currently applicable. The figures refer to a vehicle with basic configuration in Germany and the range shown considers transmission (automatic or manual) and the different wheels and tyres available on the selected model and may vary during the configuration.

The values of the vehicles labelled with (*), are already based on the test cycle according to the new WLTP regulation and are translated back into NEDC-equivalent values in order to allow a comparison between vehicles. More information on the transition from NEDC to WLTP test procedures can be found here.

These figures are intended for comparison purposes and may not be representative of what a user achieves under usual driving conditions. For plug-in hybrid vehicles and battery electric vehicles the figures have been obtained using a combination of battery power and petrol fuel after the battery had been fully charged. Plug-in hybrid vehicles and battery electric vehicles require mains electricity for charging. The CO2 emissions labels are determined according to Directive 1999/94/EC and the Passenger Car (Fuel consumption and CO2 Emissions Information) Regulations 2001, as amended. They are based on the fuel consumption, CO2 values and energy consumptions according to the NEDC cycle.

A guide on fuel economy and CO2 emissions which contains data for all new passenger car models is available at any point of sale free of charge. For further information you can also visit this link.

Search Settings.

Press Release
Press Kit
Speech
Fact & Figures
Spanish
  • Language of Attachment
  • Arabic
  • Chinese - simplified
  • Chinese - traditional
  • English
  • English - UK
  • French
  • German
  • Italian
  • Japanese
  • Korean
  • Multilingual
  • Russian
  • Spanish
Updates
Top-Topic
Submit
Reset
 
Sun
Mon
Tue
Wed
Thu
Fri
Sat
 
Login