Do you need help? Please contact our support team from 9 to 17 CET via support.pressclub@bmwgroup.com.

PressClub United Kingdom · Article.

BMW Group commences in-house production of fuel cells for BMW iX5 Hydrogen in Munich.

+++ Hydrogen is an additional option for electric drive systems +++ Fuel cells are manufactured in the company’s competence centre for hydrogen +++ BMW Group leads the way in hydrogen technology in the premium electric vehicle segment +++

Technology
·
BMW i
·
Corporate
·
Sustainability
·
Mobility of the Future
·
Electrification
 

Press Contact.

Georgina Cox
BMW Group

Tel: +44 (0) 7815 370 878

send an e-mail

Author.

Georgina Cox
BMW Group

This article in other PressClubs

Note: This press release is a 1:1 copy of the original issued by BMW headquarters in Germany. No adaptions have been made to cater to the UK market.

Munich.
On 31 August, Chairman of the Board of Management of BMW AG Oliver Zipse and Frank Weber, Member of the Board of Management of BMW AG responsible for Development, will come together to inaugurate fuel cell system production at the company’s competence centre for hydrogen in Munich. The reason for this occasion is the small series of BMW iX5 Hydrogen cars that will be entering service around the world from the end of this year for test and demonstration purposes. The combination of fuel cell and high-performance battery is set to enrich the company’s portfolio by adding a unique form of drive system for the premium segment. The BMW Group is playing a visionary and pioneering role in this technology with the aim of achieving a more diversified transition to zero-emission mobility.

“As a versatile energy source, hydrogen has a key role to play on the road to climate neutrality. And it will also gain substantially in importance as far as personal mobility is concerned. We think hydrogen-powered vehicles are ideally placed technologically to fit alongside battery-electric vehicles and complete the electric mobility picture,” said Oliver Zipse, Chairman of the Board of Management of BMW AG, in Munich on Wednesday. “By commencing small-scale production of fuel cells today, we are demonstrating the technical maturity of this type of drive system and underscoring its potential for the future.”

“Our many years of research and development work have enabled us to get the very most out of hydrogen technology,” added Frank Weber, Member of the Board of Management of BMW AG, Development. “We have managed to more than double the fuel cell’s continuous output in the second-generation fuel cell in the BMW iX5 Hydrogen, while weight and size have both decreased drastically.”

Thanks to these advances, the BMW Group leads the way in the development of hydrogen technology and considers it to hold great promise for its next generation of vehicles.

Technological expertise and high standards of efficiency in the drive system
The BMW Group will now be manufacturing highly efficient fuel cell systems at its in-house competence centre for hydrogen. This technology is one of the core elements in the BMW iX5 Hydrogen and generates a high continuous output of 125 kW/170 hp. It teams up with an electric motor featuring fifth-generation BMW eDrive technology and a high-performance battery purpose developed for this vehicle to enable its powertrain to deliver 275 kW/374 hp. The development team incorporated the powerful drive system – comprising two hydrogen tanks, the fuel cell and the electric motor – into the existing BMW X5 platform for the small production run. The BMW iX5 Hydrogen already successfully demonstrated its excellent everyday usability, even at very low temperatures, during the final round of winter testing in Sweden at the start of this year.

The impressive testing results of this new small-scale series of cars are rooted in the BMW Group’s extensive experience with the use of hydrogen as a drive technology. Hydrogen-powered combustion engines had already been in use prior to the arrival of the fuel cell system. Efficiency considerations prompted the BMW Group to continue development work in this area from 2015 with the BMW 5 Series GT Hydrogen Cell based on fuel cell technology. Fuel cell technology has since been steadily refined by harnessing the company’s vast know-how in the field of conventional drive technologies and applying the exacting standards of all-round efficiency it expects of all its vehicles.

Production of fuel cell systems in Munich
A chemical reaction takes place in the fuel cell between hydrogen from the tanks and oxygen from the air. Maintaining a steady supply of both elements to the fuel cell’s membrane is of crucial importance for the drive system’s efficiency. In addition to the technological equivalents of features found on combustion engines, such as charge air coolers, air filters, control units and sensors, the BMW Group also developed special hydrogen components for its new fuel cell system. These include the high-speed compressor with turbine and high-voltage coolant pump, for instance.

The BMW Group sources the individual fuel cells required for manufacturing the BMW iX5 Hydrogen from the Toyota Motor Corporation. The two companies have enjoyed a partnership characterised by trust for many years and have been collaborating on fuel cell drive systems since 2013. Fuel cell systems are manufactured in two main steps. The individual fuel cells are first assembled into a fuel cell stack. The next step involves fitting all the other components to produce a complete fuel cell system.

Stacking of the fuel cells is a fully automated process. Once the individual components have been inspected for any damage, the stack is compressed by machine with a force of five tonnes and placed in a housing. The stack housing is manufactured in the light metal foundry at BMW Group Plant Landshut using a sand casting technique. For this, molten aluminium is poured into a mould made from compacted sand mixed with resin in a process specially designed for this small-series vehicle. The pressure plate, which delivers hydrogen and oxygen to the fuel cell stack, is made from cast plastic parts and light-alloy castings, also from the Landshut plant. The pressure plate forms a gas-tight and water-tight seal around the stack housing.

Final assembly of the fuel cell stacks includes a voltage test along with extensive testing of the chemical reaction within the cells. Finally, all the different components are fitted together in the assembly area to produce the complete system. During this system assembly stage, further components are fitted, such as the compressor, the anode and cathode, the high-voltage coolant pump and the wiring harness.

Article Offline Attachments.

Article Media Material.

My.PressClub Login

PressClub Information

RSS NEWS FEED.

Open Website

With the PressClub RSS service, you can also receive publications as a news feed. Choose from various topic-specific feeds as needed, or use the feed with the latest articles to stay up to date.

CO2 emission information.

The values for fuel consumption, CO2 emissions and energy consumption shown were determined in a standardised test cycle according to the European Regulation (EC) 715/2007 in the version currently applicable. The figures refer to a vehicle with basic configuration in Germany and the range shown considers transmission (automatic or manual) and the different wheels and tyres available on the selected model and may vary during the configuration.

The values of the vehicles labelled with (*), are already based on the test cycle according to the new WLTP regulation and are translated back into NEDC-equivalent values in order to allow a comparison between vehicles. More information on the transition from NEDC to WLTP test procedures can be found here.

These figures are intended for comparison purposes and may not be representative of what a user achieves under usual driving conditions. For plug-in hybrid vehicles and battery electric vehicles the figures have been obtained using a combination of battery power and petrol fuel after the battery had been fully charged. Plug-in hybrid vehicles and battery electric vehicles require mains electricity for charging. The CO2 emissions labels are determined according to Directive 1999/94/EC and the Passenger Car (Fuel consumption and CO2 Emissions Information) Regulations 2001, as amended. They are based on the fuel consumption, CO2 values and energy consumptions according to the NEDC cycle.

A guide on fuel economy and CO2 emissions which contains data for all new passenger car models is available at any point of sale free of charge. For further information you can also visit this link.

Search Settings.

Press Release
Press Kit
Speech
Fact & Figures
Spanish
  • Language of Attachment
  • Arabic
  • Chinese - simplified
  • Chinese - traditional
  • English
  • English - UK
  • French
  • German
  • Italian
  • Japanese
  • Korean
  • Multilingual
  • Russian
  • Spanish
Updates
Top-Topic
Submit
Reset
 
Sun
Mon
Tue
Wed
Thu
Fri
Sat
 
Login