Do you need help? Please contact our support team from 9 to 17 CET via support.pressclub@bmwgroup.com.

PressClub United Kingdom · Article.

International success of MINI signals further investment and employment for the UK motor industry

Press release and speech from regional press briefing by Dr Reithofer, BMW Board Member for Production at BMW Group Plant Oxford The international success of the new MINI range, produced at BMW Group Plant Oxford, has resulted in a further £50 million investment at the factory to increase production and productivity, BMW Group announced today

MINI

Press Contact.

Barbara Brailey
BMW Group

Tel: +44-1344-480-320
Fax: +44-1344-480-306

send an e-mail

Author.

Barbara Brailey
BMW Group

3 May 2002 Release immediate


International success of MINI signals further investment and employment for the
UK motor industry

The international success of the new MINI range, produced at BMW Group Plant
Oxford, has resulted in a further £50 million investment at the factory to
increase production and productivity, BMW Group announced today.

The world-wide customer reaction to the MINI, MINI Cooper and the soon to be
launched MINI Cooper S has also led to the creation of 700 more permanent jobs
at Oxford and a further 300 jobs at the BMW Group Pressings plant at Swindon
and 150 jobs at the Group's transmission factory in the West Midlands, which
supplies MINI gearboxes.

In the 12 months since the start of full production - on April 26 2001 -
employment at Plant Oxford has risen from 2,400 to around 4,500 with the early
introduction of three shift, seven days working, 51 weeks a year.

Speaking in Oxford, Dr Norbert Reithofer, BMW Board Member for Production said:
"The MINI is clearly an international success story. Customer reaction around
the world has been astounding. People have been camping outside dealers in the
United States for a test-drive and showrooms in Japan had to be closed for a
while to cope with the numbers of people wanting to see the car."

"We had planned to produce 30,000 cars to the end of last year but the actual
figure was more than 42,000. With further production rises already this year
Plant Oxford will produce the 100,000th MINI during the month of May - just 13
months after the start of volume production" said Dr Reithofer.

Investment at the plant will include measures to improve productivity and
flexibility, develop the site infrastructure and introduce the MINI Cooper S.

The MINI range will be available in 50 markets throughout the world by the end
of 2002, with the United States, Europe and Japan being major markets for the
car. About 75 per cent of sales are expected to be for the MINI Cooper and MINI
Cooper S models.

In the UK market, MINI sales in the first quarter of 2002 continued to rise
with 10,595 units delivered to customers out of total sales of more than 25,000
MINIs throughout Europe.

Editors' note:
The BMW Group plays a major role in the UK motor industry with an engine
production plant at Hams Hall, Warwickshire; MINI production at Oxford; body
pressings at Swindon; transmissions in the West Midlands and a UK sales
organisation at Bracknell. A new headquarters and manufacturing facility for
Rolls-Royce cars is under construction at Chichester, West Sussex in
preparation for BMW to assume responsibility for the Rolls-Royce business from
January 2003.

For further information please contact:

Angela Wigley, Corporate Communications - UK
Tel. 01865 826748

Martina Mertes, Corporate Communications Plant Oxford
Tel. 01865 826777

Article Offline Attachments.

My.PressClub Login

PressClub Streaming

JAPAN MOBILITY SHOW.

Click here

Here you can see the webcast of the BMW Group Keynote at the Japan Mobility Show 2025. 

CO2 emission information.

The values for fuel consumption, CO2 emissions and energy consumption shown were determined in a standardised test cycle according to the European Regulation (EC) 715/2007 in the version currently applicable. The figures refer to a vehicle with basic configuration in Germany and the range shown considers transmission (automatic or manual) and the different wheels and tyres available on the selected model and may vary during the configuration.

The values of the vehicles labelled with (*), are already based on the test cycle according to the new WLTP regulation and are translated back into NEDC-equivalent values in order to allow a comparison between vehicles. More information on the transition from NEDC to WLTP test procedures can be found here.

These figures are intended for comparison purposes and may not be representative of what a user achieves under usual driving conditions. For plug-in hybrid vehicles and battery electric vehicles the figures have been obtained using a combination of battery power and petrol fuel after the battery had been fully charged. Plug-in hybrid vehicles and battery electric vehicles require mains electricity for charging. The CO2 emissions labels are determined according to Directive 1999/94/EC and the Passenger Car (Fuel consumption and CO2 Emissions Information) Regulations 2001, as amended. They are based on the fuel consumption, CO2 values and energy consumptions according to the NEDC cycle.

A guide on fuel economy and CO2 emissions which contains data for all new passenger car models is available at any point of sale free of charge. For further information you can also visit this link.

Search Settings.

Press Release
Press Kit
Speech
Fact & Figures

Search with attachment language.

Spanish
  • Language of Attachment
  • Arabic
  • Chinese - simplified
  • Chinese - traditional
  • English
  • English - UK
  • French
  • German
  • Italian
  • Japanese
  • Korean
  • Multilingual
  • Russian
  • Spanish
Updates
Top-Topic

Set publication time.

no Selection
  • no Selection
  • past 24 hours
  • past Week
  • past Month
  • past Year
Submit
Reset
 
Sun
Mon
Tue
Wed
Thu
Fri
Sat
 
Login