BMW Motorrad presents the new BMW C 400 X and C 400 GT.

Munich. With the C 400 X in 2017 and the C 400 GT in 2018, BMW Motorrad presented two premium vehicles for the midsize scooter segment for the first time. Since then, the C 400 X has been impressing Urban Mobility segment customers with its dynamic ride characteristics, while the C 400 GT, as a Gran Turismo variant suitable for touring, stands out thanks to its enhanced range of comfort features. To make sure that this remains the case in the future too, BMW Motorrad has now upgraded the two midsize scooters and, in addition to some significant technical optimisations, has also given them new colours and styles.

Powerful single-cylinder engine according to EU-5 homologation with E-gas, new engine management and optimised centrifugal clutch.

As before, the proven efficiency-optimised single-cylinder engine with an output of 25 kW (34 hp) at 7 500 rpm and a torque of 35 Nm at 5 750 rpm serves as the drive unit. Power transmission is via a CVT (Continuously Variable Transmission) gearbox and a torsionally stiff drivetrain swing arm with innovative swing arm bearing for minimum vibration and therefore maximum comfort. Thanks to current EU 5 homologation, the new C 400 X and C 400 GT remain the ideal partners for dynamic, carefree scooter fun.

For this reason the engine has been equipped with a so-called "electronic throttle grip" (E-gas) and an electrically operated throttle valve as well as a new engine management system. Further optimisations are a modified matrix and coating of the catalytic converter, a wideband oxygen sensor, modifications to the cylinder head, a new sensor on the generator cover, an adapted wiring harness and modified idle speed control. The idle speed regulator in the airbox has been omitted and the idle speed control is now carried out via a throttle valve bypass and a turbulence system.

In addition to complying with EU-5 homologation, the revised drive impresses riders above all with an even smoother and more sensitive throttle response as well as increased idling stability. In addition to E-gas and new engine management, the optimised springs for the centrifugal clutch also contribute to increasing engine running stability. The tolerance of the spring force was limited, the spring force was slightly increased and the engine speed was slightly raised as the clutch re-engages. Due to the reduced tolerances, the spread of the speed when disengaging the clutch is smaller and belated opening of the clutch - as occasionally known from the predecessor - no longer occurs.

Automatic Stability Control (ASC) with automatic radius calibration and increased regulation quality. Homologation of the full top speed now also for China.

In the course of the technical revision, the new C 400 X and C 400 GT also received an optimised ASC. Instead of the previous manual recalibration - for example when changing tyres - the new system now has an automatic radius calibration. In addition, the new ASC is designed for significantly lower friction values than before. When riding, this is noticeable in a more sensitive response and significantly increased regulation comfort - especially on wet and slippery surfaces. Deactivating ASC is now no longer necessary.

Until now, the two vehicles were homologated for the Chinese market for a speed of 129 km/h. The legal requirements in China have changed and so it has now become possible to homologate the full top speed of 139 km/h there as in the other markets.

Brake system with new front brake calipers and adjusted lever travel of front and rear brakes. Storage compartment with optimised lighting and USB charging socket.

The brake system of the new C 400 X and C 400 GT has also been revised. Thanks to new brake calipers, the double-disc brake system at the front now offers a more stable and clearly defined pressure point as well as improved roll-back behaviour of the brake pistons. This is accompanied by aligned lever travels for the rear brake on the left and the front brake on the right for a symmetrical braking feel.

The optimised lighting of the storage compartment (volume 31 l, 45 l with Flexcase) under the seat bench improves comfort significantly. The lighting now no longer comes from the side, but from above for even better illumination. In addition to the 12-volt onboard socket, the front right storage compartment is now equipped with a USB charging socket.

Two new attractive colours each as well as the style variants "Sport" (C 400 X) and "Triple Black" (C 400 GT).

As before the new BMW C 400 X and C 400 GT also feature the unmistakable design language of BMW Motorrad. Modern and future-oriented looks reflect the BMW Motorrad design philosophy perfectly. The new midsize scooters from BMW Motorrad are each offered in three different colour variants.

C 400 X.
• Base paint finish Blackstorm metallic.
• Optional Granite Grey metallic paint finish (+ 50.00 €).
• Style Sport (Blackstorm metallic/Racingblue metallic matt, + € 200.00).

C 400 GT.
• Base paint finish Alpine White.
• Optional Kallisto Grey metallic paint finish (+ 50.00 €).
• Style Triple Black (Blackstorm metallic with matt tapes, + 200.00 €).

All new features of the BMW C 400 X and C 400 GT at a glance:

• Powerful single-cylinder drive according to EU-5 homologation with E-gas, new engine management and optimised centrifugal clutch.
• Optimised idling behaviour.
• Automatic Stability Control (ASC) with automatic radius calibration and increased regulation quality.
• Brake system with new front brake calipers, clearly defined pressure point and adjusted lever travel of front and rear brakes.
• Seat storage compartment with optimised lighting and USB charging socket in the front right storage compartment.
• Two new attractive colours each as well as the style variants "Sport" (C 400 X) and "Triple Black" (C 400 GT).



You will find press material on BMW motorcycles and BMW Motorrad rider equipment in the BMW Group PressClub at www.press.bmwgroup.com.

In case of queries, please contact:

Gerhard Lindner, BMW Motorrad Communications
Tel.: +49 151 601 53472, Gerhard.LA.Lindner@bmw.de

Tim Diehl-Thiele, Head of Communications BMW Motorrad
Tel.: +49 89 382 - 57505, Tim.Diehl-Thiele@bmw.de

Jennifer Treiber-Ruckenbrod, Head of Communications MINI and BMW Motorrad
Tel.: +49-89-382-35108, Jennifer.Ruckenbrod@bmwgroup.com


Internet: www.press.bmw.de
E-mail: presse@bmw.de


The BMW Group

With its four brands BMW, MINI, Rolls-Royce and BMW Motorrad, the BMW Group is the world's leading premium manufacturer of automobiles and motorbikes and also provides premium financial and mobility services. The BMW Group production network comprises 31 production and assembly facilities in 15 countries; the company has a global sales network in more than 140 countries.

In 2020, the BMW Group sold over 2.3 million passenger vehicles and more than 169,000 motorbikes worldwide. The profit before tax in the financial year 2019 was € 7.118 billion on revenues amounting to € 104.210 billion. As of 31 December 2019, the BMW Group had a workforce of 126,016 employees.

The success of the BMW Group has always been based on long-term thinking and responsible action. The company has therefore established ecological and social sustainability throughout the value chain, comprehensive product responsibility and a clear commitment to conserving resources as an integral part of its strategy.

www.bmwgroup.com
Facebook: http://www.facebook.com/BMWGroup
Twitter: http://twitter.com/BMWGroup
YouTube: http://www.youtube.com/BMWGroupView
Instagram: https://www.instagram.com/bmwgroup
LinkedIn: https://www.linkedin.com/company/bmw-group/