Avtonomno transportno vozilo v tovarni BMW Group v Regensburgu natančno in brez voznika vozi skozi stiskalnico.

Dodatne informacije so na voljo spodaj in v priponki v angleščini. 

+++ Intelligent, one-of-a-kind logistics solution relies on innovative LiDAR (Light Detection And Ranging) sensors – the key 3D technology for autonomous driving and automated processes +++ Driverless transport system improves efficiency and safety at press plant +++ Payload of up to 55 tonnes +++ Closed recycling loop for pressed parts – use of secondary steel saves about 160,000 tonnes of CO₂ per year +++

Regensburg. With the introduction of an autonomous transport vehicle at its press plant, BMW Group Plant Regensburg is driving forward with digitalisation and automation of its manufacturing processes: The company is thus taking a further step towards the digital and intelligently connected BMW iFACTORY. The driverless platform truck, with its electric drive train, will handle the internal transport of press tools and steel blanks for the press lines autonomously, with a payload of up to 55 tonnes. Using state-of-the-art sensor technology, the transport system navigates accurately and fully autonomously through the production facilities of the Regensburg press plant at a speed of four kilometres per hour – without a driver. The solution is one of a kind and currently exists nowhere else in the world.

“We see tremendous potential in the rollout of autonomous logistics solutions. The emission-free electric vehicle will allow us to make manufacturing processes at our press plant even more efficient and more flexible, as well as reducing transport journeys and lead times. This will not only boost productivity, but also save energy and improve occupational safety for our employees,” says Tobias Müller, press plant maintenance manager at BMW Group Plant Regensburg.

Use of innovative LiDAR sensor technology

The new driverless transport vehicle uses Innovative LiDAR (Light Detection And Ranging) technology from manufacturer Pefra. “LiDAR sensors are a key technology for autonomous driving and automated processes,” explains Müller. In conjunction with cameras and radar sensors, they monitor their surroundings, aiding in orientation, obstacle detection and distance measurement, delivering enhanced safety and efficiency in a complex environment – whether on busy roads or in automated industrial settings, like at the BMW Group’s press plant in Regensburg. The 3D LiDAR process involves scanning the surroundings, using numerous individual optical distance measurements that are then combined to generate a 3D image ("scatter plot") of the environment captured by the LiDAR sensor.

BMW Group Plant Regensburg 

The press plant at BMW Group Plant Regensburg processes about 1,100 tonnes of steel every workday, equivalent to a daily output of 131,000 pressed parts. The scope of production includes 113 different body components. In addition to structural and reinforcement parts, the press plant also forms large outer panel sections, such as side frames, door outer skins and bonnets, from sheet steel that can measure up to 4.5 metres in length. The steel rolls processed can weigh up to 33 tonnes. The most powerful of the four press lines at the Regensburg press shop harnesses high-speed servo technology, making it one of the world's fastest presses, with a press force of 9,000 tonnes – equivalent to the weight of the Eiffel Tower. The press achieves a rate of up to 23 strokes per minute. The body components manufactured at the press plant are then assembled into vehicle bodies at BMW Group Plant Regensburg's nearby body shop.

Closed recycling loop: Use of secondary steel saves Regensburg press plant around 160,000 tonnes of CO₂ per year

Operations at the Regensburg press shop generate about 80,000 tonnes of offcuts each year, which are then recycled within a closed loop. The first step is for the offcuts to be processed by a recycling press, which forms them into steel cubes measuring 40 x 40 centimetres and weighing 220 kilograms each. These are then sent back to the steel supplier, where they are processed into what is known as secondary steel. The use of secondary steel at the BMW Group's Regensburg press plant generates two tonnes less CO₂ per tonne of steel, compared to production of primary steel. This reduces the plant's CO₂ footprint by approximately 160,000 tonnes per year. To protect employees, residents and the environment from noise emissions and vibrations, the production and recycling facilities at the Regensburg press plant are equipped with sound insulation. Additionally, all production systems operate with minimal vibrations.

BMW Group Corporate Communications
Franziska Schnidtmann, Communications Regensburg
Cell phone: +49 151 6060 3896, Email: Franziska.Schnidtmann@bmwgroup.com

Saskia Graser, head of Communications Regensburg and Wackersdorf
Cell phone: +49 151 6060 2014, Email: Saskia.Graser@bmw.de

Media website: www.press.bmwgroup.com

Email: presse@bmw.de

BMW Group Plants Regensburg and Wackersdorf

The BMW Group has viewed itself for decades as the benchmark for production technology and operational excellence in vehicle construction – including at its locations in Regensburg and Wackersdorf. 
The BMW Group vehicle plant in Regensburg has been in operation since 1986 and is one of more than 30 BMW Group production locations worldwide. A total of up to 1,400 vehicles of the BMW X1 and BMW X2 models come off the production line at Plant Regensburg every workday – destined for customers all over the world. Different types of drive trains are flexibly manufactured on a single production line – from vehicles with internal combustion engines to plug-in hybrids, to fully-electric models.

High-voltage batteries for the electric models built in Regensburg are also produced locally, in direct proximity to the vehicle plant. They are assembled at the electric component production facility, which opened in 2021 at the Leibnizstrasse location.
BMW Innovation Park Wackersdorf also belongs to the Regensburg site. The 55-hectare campus built in the 1980s was originally intended as a nuclear reprocessing facility. The BMW Group has located its cockpit production there, as well as its parts supply for overseas plants. In addition to BMW as the largest employer, several other companies are also based at Innovation Park Wackersdorf. A total of around 2,500 employees work there.

The BMW Group core staff at the Regensburg and Wackersdorf locations in eastern Bavaria is made up of around 9,250 employees, including more than 300 apprentices.

www.bmwgroup-werke.com/regensburg/de.html